Fast, code-aware repair for rolling fire doors and fire-rated commercial door systems that fail inspections, won’t reset or close properly.
Fire-Rated Door Repair
- Rolling fire door repair
- Failed drop test corrections
- Release & fusible link replacement
- Operator & closing system repair
- Same-day commercial response
- Serving Southeast Louisiana
When a fire-rated door fails a drop test, won’t release, won’t reset, or won’t close fully, it’s no longer protecting your facility — and it may be out of compliance. We repair rolling fire doors and fire-rated systems with a clear focus on NFPA 80 requirements, proper operation, and documented re-testing so your doors are safe, compliant, and ready.
Need Service Fast?
Trusted by BUSINESSES ACROSS
Southeast Lousiana
Fire-Rated Door Repair
- Rolling fire door repair
- Failed drop test corrections
- Release & fusible link replacement
- Operator & closing system repair
- Same-day commercial response
- Serving Southeast Louisiana
When a fire-rated door fails a drop test, won’t release, won’t reset, or won’t close fully, it’s no longer protecting your facility — and it may be out of compliance. We repair rolling fire doors and fire-rated systems with a clear focus on NFPA 80 requirements, proper operation, and documented re-testing so your doors are safe, compliant, and ready.
Need Service Fast?
Trusted by BUSINESSES ACROSS
Southeast Lousiana
Quick Page Navigation
Brands We Install & Service Every Day
Premium commercial doors, gates, operators, access systems, and high-security solutions from manufacturers technicians rely on every day.
We partner with the most proven brands in the industry — delivering longer equipment life, fewer breakdowns, and dependable support for your business when it matters.
Premium commercial doors, gates, operators, and access systems —
installed and serviced by manufacturers technicians trust most.
Fire Doors Must Perform Exactly When Required
Fire doors are life-safety systems governed by strict NFPA 80 requirements. They may sit idle for long periods, but when activated, they must release, close, and latch correctly without hesitation. Annual inspection and drop testing verifies proper operation and identifies issues that could cause failure during an emergency.
Rolling fire door inspection & drop testing
Controlled drop testing to verify proper release, descent speed, full closure, and unobstructed travel.
Swinging fire door inspection
Clearance checks, latch engagement, closer function, coordinator sequencing, and fire label verification.
Failed drop test corrections
Identification and correction of issues that prevent proper closure, followed by required re-testing.
Release device & fusible link testing
Inspection and replacement of fusible links, chains, cables, and mechanical release components as required.
Reset & re-arming after activation
Proper reset and re-arming after drop testing or activation to return the door to ready status.
Guide, track & alignment issues
Correction of binding, obstructions, or misalignment that interferes with smooth, controlled descent.
Label & rating verification
Verification of fire door labels with notes for missing, damaged, or illegible markings.
Documentation for compliance
Clear pass/fail results, inspection notes, and corrective actions suitable for AHJ, insurance, and audits.
Why Businesses Across Southeast Louisiana Call Us
When a fire-rated door fails a drop test, won’t reset, or won’t close fully, it’s a life-safety and compliance issue — not a routine repair. We treat fire door failures with urgency, accuracy, and full awareness of NFPA 80 requirements.
Fire door failed inspection or won’t reset?
Same-day repair for rolling fire doors, release systems, and failed drop tests across Southeast Louisiana.
Fire-Rated Doors in Life-Safety Critical Facilities
We repair fire-rated doors in facilities where code compliance, compartmentalization, and occupant safety are non-negotiable.
Reduce Fire Door Failures Before Inspections
Many fire-rated door failures are preventable. Wear, misalignment, and release issues often go unnoticed until a door fails a drop test or inspection. Preventive service helps identify problems early, reduces corrective repairs, and keeps fire doors ready when they’re required to perform.
Preventive service includes:
- Guide, track & obstruction inspection
- Curtain, slat & alignment checks
- Tension & controlled descent verification
- Release device & fusible link inspection
- Reset & re-arming readiness checks
- Pre-inspection review before annual NFPA 80 testing
Fire-Rated Doors Built for Life Safety & Code Compliance
Fire-rated doors are designed to protect people and property by containing smoke and fire to a specific area. When a door fails a drop test, won’t release, won’t reset, or won’t close fully, it’s not just a repair issue — it’s a life-safety and compliance problem. We specialize in fire-rated door repair and rolling fire door repair for facilities across Southeast Louisiana that must stay inspection-ready.
Many calls start after a failed fire door inspection or an annual test identifies deficiencies. Common causes include guide misalignment, damaged slats, incorrect tension, obstructions, and problems with release components. We correct the mechanical and system-level issues that prevent proper closure, then verify operation so doors perform the way they’re required to in an emergency.
We also handle fire door release repair including fusible link replacement, release device issues, and reset/re-arming problems after activation. For rolling fire doors, we address binding, uneven travel, and descent control issues that can cause incomplete closure or unsafe operation. Every service call focuses on restoring predictable performance — not “getting it moving” and leaving compliance questions behind.
For safety officers, facility managers, and maintenance teams, clarity matters. We provide straightforward findings, repair options, and guidance on preventing repeat failures. If you need annual inspection and drop testing with documentation, our NFPA 80 fire door service and testing program can keep your facility on a clean, trackable schedule year after year.
Fire-Rated Commercial Door Repair & Testing – Common Questions
Clear answers for facility managers, safety officers, and maintenance teams responsible for fire-rated doors, NFPA 80 compliance, and life-safety systems.
What fire-rated door issues do you repair?
We repair rolling fire doors and fire-rated commercial doors that fail inspection, won’t release, won’t reset, or don’t close properly. Common issues include damaged slats, guide binding, incorrect tension, release device failures, and doors that do not descend smoothly or fully during a drop test.
Why do fire doors fail inspection or drop testing?
Fire doors commonly fail due to:
- obstructions in the opening or guides
- improper or uneven tension
- misaligned or damaged guides
- fusible link or release device problems
- binding or hesitation during descent
- missing or illegible fire-rating labels
We identify the cause, correct it when possible, and re-test to verify compliant operation.
Can you repair a fire door that failed an NFPA 80 inspection?
Yes. Many fire doors fail for correctable reasons such as alignment, tension, release components, or hardware issues. We document deficiencies, complete repairs when possible, and confirm proper operation for re-inspection.
Do you replace fusible links and release devices?
Yes. We inspect and replace fusible links, chains, cables, and mechanical release components as part of fire-rated door repair and testing.
When does a fire-rated door need replacement instead of repair?
Replacement may be recommended if the door has extensive slat damage, structural issues, missing fire ratings, or repeated failures that cannot be corrected safely. We’ll explain options clearly so you can make an informed decision.
Do you perform NFPA 80 fire door inspections and drop testing?
Yes. We provide annual NFPA 80 inspections and controlled drop testing for rolling and swinging fire doors, including documentation suitable for AHJ review, insurance audits, and compliance records.
Can repairs and re-testing be completed during the same visit?
Often, yes. If deficiencies can be corrected safely during the visit, we’ll complete repairs and re-test so the door passes inspection without multiple appointments.
Which areas do you service for fire door inspection and repair?
We serve Greater New Orleans and surrounding areas including Metairie, Kenner, Harahan, Jefferson, Gretna, Harvey, Marrero, River Ridge, Westwego, St. Rose, and nearby communities. Call 504-667-3666 to schedule service.
How often must fire-rated doors be inspected and tested?
NFPA 80 requires fire doors to be inspected and tested annually, and again after any repair, modification, or activation.
Do you offer annual fire door inspection programs?
Yes. We offer scheduled annual inspection and testing programs to keep facilities compliant, documented, and prepared for audits.
Can you manage fire door compliance across multiple facilities?
Yes. We coordinate inspection schedules, documentation, and repairs across multiple sites so compliance stays predictable and consistent.
Compliance Deadlines Don’t Wait
“Our insurance carrier flagged multiple fire doors and required annual documentation. GDS inspected, drop-tested, repaired what was needed, and handed us clear reports. Our next inspection was painless.”
Need NFPA 80 inspection, drop testing, or fire-rated door repair?
Use the Commercial Service Request form below or call 504-667-3666.
Fire-Rated Door Repair & Inspection Request
Failed an NFPA 80 inspection or need fire door testing or repair?
Request fire-rated commercial door service across Greater New Orleans and nearby areas.
- Phone Number
- Location
- Email Us